Noise Control Foam

Studio Foam Kits

The purpose of our Soundproof Foam division is to bring quality, acoustic products to businesses and consumers. You can expect a full line of high quality acoustical foams, barrier composites, and sound absorbing materials. In addition to providing a full range of standard stock items, we are able to manufacture a wide range of different composites. If you are looking for a custom composite please allow us to quote it for you.

Click picture to enlarge.

studio_small


studioroom2_small

studioroom1_small

studio-control-rm_small

wallacousticfoam_small

studioroom3_small

booth-vocal2_small

studioroom4_small
microphonefoam_small

microphone_small
24″ x 24″ x 22″ deep
$ 125.00  Free Shipping

studio-control-rm2_small
acousticpic_small
ceiling-tiles-3_small
 

studioroom5_small

logoforband_small

APPLICATIONS: Residential, Commercial, and Industrial

Click Here for Adhesive Glue
* To remove the tiles off of the wall (without adhesive glue) try to use a steamer and then you may need liquid paint thinner.
* Please note: there may be air holes or “birthmarks” that cannot be controlled or replaced. If you need to see a picture of what it looks like please let us know.
* Vacuum packed orders- We vacuum pack the foam to reduce on shipping cost. All Vacuum packed packages will have to be opened right away and you will need to give the foam 1-2 days to come back to it’s original shape. It will look a little misshaped and not measure to it’s correct size until after you let it expand back out. Foam N’ More will not be responsible for vacuumed packages that are damaged or have missing pieces (that have not been open) for more then 2 weeks upon delivery.

Color Chart
Charcoal Red Purple Blue
nccharcoal_small ncred_small ncpurple_small ncblue_small
Beige
This color is discontinue
Green Yellow
This color is discontinue
Burgundy
ncbeige_small
pbeige_small
green_small

yellow_small

burgundy_small

Wedge & Pyramid Foam
(Charcoal)
12″ x 12″
(1 Sq. Ft.)
24″ x 12″
(2 Sq. Ft.)
24″ x 24″
(4 Sq. Ft.)
24″ x 48″
(8 Sq. Ft.)
1″ Thick $ 0.75 $ 1.50 $ 3.00 $ 6.00
1 1/2″ Thick $ 0.99 $ 1.98 $ 3.96 $ 7.92
2″ Thick $ 1.24 $ 2.48 $ 4.96 $ 9.92
3″ Thick $ 1.74 $ 3.48 $ 6.96 $ 13.92
4″ Thick $ 2.23 $ 4.46 $ 8.92 $ 17.84
Wedge & Pyramid Foam
Available in color
12″ x 12″
(1 Sq. Ft.)
24″ x 12″
(2 Sq. Ft.)
24″ x 24″
(4 Sq. Ft.)
24″ x 48″
(8 Sq. Ft.)
1″ Thick   $ 0.86 $ 1.72 $ 3.44 $ 6.88
1 1/2″ Thick   $ 1.14 $ 2.28 $ 4.56 $ 9.12
2″ Thick   $ 1.43 $ 2.86 $ 5.72 $ 11.44
3″ Thick   $ 2.00 $ 4.00 $ 8.00 $ 16.00
4″ Thick   $ 2.56 $ 5.12 $ 10.24 $ 20.48
Our Acoustic Foam is a wonderful product for absorbing sound waves, but do not mistake “sound absorption” for “sound blocking.” Acoustic foam will not block sound from going through it. To block sound you need heavy, dense material called volara foam OR minicell foam. If you need to sound block your room please contact us. Our heavy dense material is 1/4″ or 1/2″ thick, sound Barrier that goes at the bottom of each tile.

Please note: When comparing different types of Acoustic foam with other companies it is most important to look at the density and ILD of the foam. All of our acoustic foam has a 1.7lbs density and ILD of 70. Please email us for the specs sheet.

If you are blocking noise from coming out from windows, skylights or doors use charcoal firm foam. With this foam you can squeeze the foam tightly in place to block the noise from escaping.

Acoustic foam does help to make sound waves less, and are a good solution for sound absorption. This is why it is used to treat a room with a lot of echo or reverberation. It helps to create an acoustically “sound deadening” effect for rooms, with a lot of bouncing sound waves.

NRC stands for Noise Reduction Coefficient. This is a standard and commonly used method to calculate the ratings of the ASTM C423 test on noise reduction foam. This method covers frequencies between 125 and 4000HZ. The higher the NRC rating, the more sound the material can absorb.

All Noise Studio Control foam is a California 117 flame retardant specifications, class B type.

Fire resistant/retardant is a test that calculates “Flame Spread Index”, and  “Smoke Developed Index”. These numbers determine whether the material is “Class A”, “Class B”, or “Class C”. Class A tells that the material will not burn or smoke much, and Class C represents that the material will burn heavily and produce even more smoke. Class B will burn a little more than Class A, and also produce slightly more smoke than in Class A.

Disclaimer: We do not encourage anyone to do flammability tests themselves. We don’t want anyone getting hurt. Also, please check your building codes before installing our acoustic foam. Different building codes apply to different locations. Our foam will not pass the E84 Test.